6 points for using a steel bar cutter
Precautions for using the steel bar cutting machine are as follows :
1. Before the cutting machine is started, it should be checked to make sure that the cutter is not cracked, the knife holder bolts are tightened, and the protective cover is firm.
2. When cutting the material, hold the steel bar tightly, and when the movable blade moves backward, send the steel bar to the crossing, and place the end of the steel bar to swing to prevent life accidents;
3. It is strictly forbidden to use two hands to hold the steel bar on both sides of the blade to lean over to feed.
4. When cutting multiple steel bars at one time, the total cross-sectional area should be within the specified range.
5. In the process of cutting and batching, if it is found that the reinforcement has splits or severe elbows, it must be removed;
6. After working far, please turn off the power and protect the electrical switch.
Henan Haogang Machinery makes customers trust with its strong advantages and high productivity and environmental protection and energy saving features. It creates its own market place for itself. Rebar cutting machine is one of our Haogang Machinery's main products, regardless of quality In terms of craftsmanship, price, etc., they are all formulated according to standards. Rebar cutting machine equipment is cost-effective and meets user needs. Regardless of the small size of the steel bar cutting machine equipment, it is widely used nowadays, but there are a lot of raw materials that can be cut. Shearing to produce steel that meets customer needs is an essential helper in construction. Moreover, the steel bar cutting machine is light in weight, small in size and can be moved quickly, which is convenient for workers to process on the spot, saving effort and worry.
Sweep, there are surprises!