Manager Zhang of Henan Haogang Machinery talks about six safety rules for metal shredders
、起动后，待机器达到正常运转时， 才允许均匀连续地喂入作物。 1. After starting, when the standby device reaches normal operation, it is allowed to feed crops evenly and continuously.
、作业时要注意电机，脱粒机的转速， 声音及轴承的温度。 2. Pay attention to the speed of the motor, thresher, sound and bearing temperature during operation.
、喂入时操作人员应站在加料口一侧，衣服衣袖应扎紧，戴上口罩和工作帽。 3. When feeding, the operator should stand on the side of the feeding mouth, the sleeves of the clothes should be tightened, and wear a mask and a work cap.
、喂入时，要注意谷物是否有石头、镰刀、 工具螺丝等坚硬的物体，以免损坏机器和造成人身事故。 4. When feeding, pay attention to whether there are hard objects such as stones, sickle, tool screws in the grain , so as not to damage the machine and cause personal accidents.
、机器动转不许挂皮带、注油、清理及排除故障。 5. The machine is not allowed to hang on the belt, oiling, cleaning and troubleshooting.
、发现如下问题应关闭发动机，停机处理， ① 电机冒烟， ② 堵塞， ③ 粉碎质量不好 , ④ 轴承过热，超过 60 度。 6. If the following problems are found, the engine should be shut down and the machine should be shut down. ① The motor emits smoke, ② is blocked, ③ the crushing quality is not good , ④ the bearing is overheated and exceeds 60 degrees.
Sweep, there are surprises!